HP DL380z Guia do Utilizador descarregar pdf (Página 19)

Item Description

16 Secondary processor (processor 2) PCI riser connector

17 System battery

18 TPM connector

19 Optional serial port connector

X System maintenance switch

System maintenance switch

Item Default Function

S1 Off Off = HP iLO security is enabled.

On = HP iLO security is disabled.

S2 Off Off = System configuration can be changed.

On = System configuration is locked.

S3 Off Reserved

S4 Off Reserved

S5 Off Off = Power-on password is enabled.

On = Power-on password is disabled.

S6 Off Off = No function

On = ROM reads system configuration as invalid.

S7 — Off = Set default boot mode to UEFI.

On = Set default boot mode to legacy.

S8 — Reserved

S9 — Reserved

S10 — Reserved

S11 — Reserved

S12 — Reserved

To access the redundant ROM, set S1, S5, and S6 to on.

When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all

system configuration settings from both CMOS and NVRAM.

CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to properly configure

the server or data loss could occur.

IMPORTANT: Before using the S7 switch to change to Legacy BIOS Boot Mode, be sure the HP Dynamic

Smart Array B140i Controller is disabled. Do not use the B140i controller when the server is in Legacy BIOS

Boot Mode.

System board components 11

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 132 133

Sem comentários

HP DL380z Guia do Utilizador Página 19