HP Modular Smart Array 500 Starter Kit Guia do Utilizador descarregar pdf (Página 143)

HP StorageWorks 2300 Modular Smart Array CLI reference guide 143

show ports

Description Shows information about host and expansion ports on both controllers. Alias of show channels.

Syntax

show ports

Output Port

Controller ID and port number

Media

• FC(P): Fibre Channel Point-to-Point

• FC(L): Fibre Channel-Arbitrated Loop

• FC(-): Not applicable, as when the port is disconnected

• SAS: Serial Attached SCSI

Target ID

Enclosure WWN or serial number

Status

Whether the port is operational, has a problem, or is disconnected

Speed (A)

Actual host-port link speed, or blank if not applicable.

Speed (C)

FC only. Configured host-port link speed:

• FC: 2Gb or 4Gb (Gbit/sec)

• Blank if not applicable

Topo (C)

FC only. Configured topology

PID

FC only. Primary ID, or blank if not applicable

SID

FC only. Secondary ID, or blank if not applicable

Example Show port information for a system with a single FC controller:

# show ports

Port Media Target ID Status Speed(A) Speed(C) Topo(C) PID SID

----------------------------------------------------------------------------

A1 FC(L) 207000C0FF000015 OK 2Gb 2Gb Loop 0

A2 FC(L) 217000C0FF000015 OK 2Gb 2Gb Loop 1

A3 FC(L) 207000C0FF000015 OK 2Gb Auto Loop 0

A4 FC(L) 207000C0FF000015 OK 2Gb Auto Loop 0

----------------------------------------------------------------------------

Sem comentários

HP Modular Smart Array 500 Starter Kit Guia do Utilizador Página 143