HP Modular Smart Array 500 Starter Kit Guia do Utilizador descarregar pdf (Página 47)

HP StorageWorks 2300 Modular Smart Array CLI reference guide 47

create volume-set

Description Creates multiple volumes in the specified vdisk. The volumes have the same base name, size, and

default mapping settings (LUN, access, and ports)

Syntax

create volume-set vdisk vdisk basename base-name count #

size size[B|KB|MB|GB|TB|KiB|MiB|GiB|TiB] [baselun base-LUN]

[access read-write|rw|read-only|ro|no-access] [ports port]

Parameters vdisk vdisk

Name or serial number of the vdisk to create the volumes in. For syntax, see Command syntax.

basename base-name

A base name for the new volumes. A name is case sensitive, cannot include a comma, double quote,

or backslash, and can have a maximum of 20 bytes. A name that includes a space must be

enclosed in double quotes.

Resulting volumes are numbered sequentially from 000 (not 0000) through 1023. If volumes with the

specified basename already exist, names of new volumes start with the first available name in the

sequence. For example: for basename vd1_v, if vd1_v000 and vd1_v002 exist, the next volumes

created will be vd1_v001 and vd1_v003.

count #

The number of volumes to create.

size size[B|KB|MB|GB|TB|KiB|MiB|GiB|TiB]

Sets the volume size using the current base, as shown by show cli-parameters. The unit can be

specified as follows:

• If base 2 is in use: B (bytes), KiB (kibibytes), MiB (mebibytes), or GiB (gibibytes)

• If base 10 is in use: B (bytes), KB (kilobytes), MB (megabytes), or GB (gigabytes)

If no unit is specified, the unit is blocks.

baselun base-LUN

Optional. A LUN to assign to the mapping on all ports. If this parameter is omitted, the default LUN

is presented.

access read-write|rw|read-only|ro|no-access

Optional. Access privilege that hosts have to these volumes: read-write (rw), read-only (ro), or

no-access. A volume mapped with no-access is masked. The default is read-write.

ports port

Optional. The controller ports through which hosts can access the volumes. If not all ports are

specified, the unspecified ports are automatically mapped to no access. For syntax, see Command

syntax.

Example Create three 20-GB volumes with the base name vd1_v in vdisk vd1:

# create volume-set count 3 size 20GB vdisk vd1 basename vd1_v

Info: Command completed successfully. (vd1_v000) - Created volume vd1_v000.

Info: Command completed successfully. (vd1_v001) - Created volume vd1_v001.

Info: Command completed successfully. (vd1_v002) - Created volume vd1_v002.

Sem comentários

HP Modular Smart Array 500 Starter Kit Guia do Utilizador Página 47