Hp MPX200 Multifunction Router Manual do Utilizador descarregar pdf (Página 17)

Example

c:\>rcli add fcip_route -fc_port=1 -enable=yes -ge_port=1

-local_ip=10.0.0.10 -gateway_ip=10.0.0.1 -remote_ip=10.0.2.10

-mtu_size=normal -tcpwindow=16777216 -port_speed=auto -bandwidth=20

-vlan_enable=y -swcompress_enable=n /ip=10.0.0.12

FCIP route successfully set

add initiator

The add initiator command adds an initiator to the list known to the router.

Syntax

add initiator

Keywords

Specifies that CHAP is enabled for this initiator. Values are:-chap_enable=

• yes

• no

• on

• off

• true

• false

This keyword is valid for an iSCSI initiator only. It cannot be used for a Fibre Channel

initiator.

Specifies the CHAP password.-chap_secret=

This keyword is optional for an iSCSI initiator only. It cannot be used for a Fibre

Channel initiator.

Sets the FCoE portal attribute on the new initiator.-fcoe

Use this keyword only in combination with the -wwpn and -wwnn keywords.

Specifies the symbolic name for a host.—host_id

Specifies the name of the iSCSI initiator you are adding.-iscsi_name=

NOTE: Do not use this keyword with either -wwpn or -wwnn.

Indicates one of the following operating systems:-ostype=

Windows Server 2003 (default)win2k3

Windows Server 2008win2k8

Linux 2.4linux24

Linux 2.6linux26

Hewlett Packard UNIX (HP-UX)hpux

IBM Advanced Interactive eXecutive (AIX)aix

Novell NetWarenetware

Sun Solaris SPARCsolaris

Apple Macintoshmac

VMwarevmware

Open Virtual Memory System (OpenVMS)openvms

OS other than what is listed hereother

This keyword is optional for both iSCSI and Fibre Channel initiators.

add initiator 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 119 120

Comentários a estes Manuais

Sem comentários

Hp MPX200 Multifunction Router Manual do Utilizador Página 17

Comentários a estes Manuais

Manuais e produtos relacionados com Armazenamento Hp MPX200 Multifunction Router