Hp MPX200 Multifunction Router Manual do Utilizador descarregar pdf (Página 84)

Keywords

Specifies the number of times to ping at each hop.-count=

If this keyword is not used, the default ping count is 3.

Specifies the outbound port as mgmt for the management port.-port=

This keyword is optional, but if used, it must specify the outbound port as mgmt.

Example

c:\> rcli tracert system -port=mgmt -ping_ipaddr=10.0.0.11 /ip=10.0.0.12

1) 10.0.0.11 Min: <1 ms Max: 1 ms Avg(3): <1 ms

unmap global_iscsi_target

The unmap global_iscsi_target command removes the global iSCSI target from the specified

Fibre Channel port.

NOTE: This command is supported with router firmware Version 3.3.1.0 and later.

Syntax

unmap global_iscsi_target

Keywords

Specifies the Fibre Channel port number, where the first port is 1.-fc_port=

Example

c:\> rcli unmap global_iscsi_target -fc_port=1

iSCSI Global Target successfully unmapped from FC port 1

unmap target

The unmap target command removes the mapping from an iSCSI or Fibre Channel target to

an iSCSI or Fibre Channel port.

NOTE: You must specify either the -fc_target or -is_target keyword, but not both.

You must specify either the -fc_port or -ge_port keyword, but not both.

Syntax

unmap target

Keywords

Specifies the Fibre Channel port number, where the first port is 1.-fc_port=

Specifies the Fibre Channel target name.-fc_target=

Specifies the GbE port number, where the first port is 1.-ge_port=

Specifies the iSCSI target name.-is_target=

Specifies the virtual port group index starting at 1. The default is VP group 1.-vpgindex=

Example

c:\> rcli unmap target -fc_target=5001-4380-025C-C7D8 -ge_port=1

84 Command reference

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 119 120

Sem comentários

Hp MPX200 Multifunction Router Manual do Utilizador Página 84