Hp MPX200 Multifunction Router Manual do Utilizador descarregar pdf (Página 32)

• true

• false

Specifies the CHAP password.-chap_secret=

This keyword is ignored if CHAP is not enabled.

Specifies the iSCSI target to log into at the specified IP address.-is_target

Specifies the IPv4 or IPv6 address of the iSCSI target.-iscsi_ipaddr

Specifies the TCP port to use on the iSCSI target. The value must be in the range of

1024 to 65534.

-tcp_port=

If this keyword is not used, the default is port 3260.

Example

c:\> rcli login iscsi_target -port=1 -iscsi_ipaddr=10.0.0.5 /ip=10.0.0.12

iSCSI Target discovery successful

logout iscsi_target

The logout iscsi_target command logs out from a specified iSCSI target at a specified IP

address.

NOTE: This command requires router firmware Version 3.2.3.0 or later.

Syntax

logout iscsi_target

Keywords

Specifies the iSCSI target to log out from at the specified IP address.-is_target

Specifies the IPv4 or IPv6 address of the iSCSI target.-iscsi_ipaddr

Specifies the port number for the outbound iSCSI port.-port

Specifies the TCP port to use on the iSCSI target. The value must be in the range of

1024 to 65534.

-tcp_port=

If this keyword is not used, the default is port 3260.

Example

c:\> rcli logout iscsi_target -port=1 -iscsi_ipaddr=10.0.0.5

/ip=10.0.0.12

iSCSI Target discovery successful

map global_iscsi_target

The map global_iscsi_target command creates a virtual, global, iSCSI target and maps it

to a Fibre Channel port.

NOTE: This command is supported with router firmware Version 3.3.1.0 and later.

Syntax

map global_iscsi_target

32 Command reference

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 119 120

Sem comentários

Hp MPX200 Multifunction Router Manual do Utilizador Página 32