Hp MPX200 Multifunction Router Manual do Utilizador descarregar pdf (Página 174)

IP Address [2] (IPv4 or IPv6) [0.0.0.0 ]

IP Address [3] (IPv4 or IPv6) [0.0.0.0 ]

All attribute values that have been changed will now be saved.

Set properties

Configures blade CLI properties.

Admin sessionAuthority

set propertiesSyntax

Example:

MPX200 <1>(admin) #> set properties

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current value.

If you wish to terminate this process before reaching the end of the list

press 'q' or 'Q' and the ENTER key to do so.

CLI Inactivity Timer (0=Disable, 1=15min, 2=60min) [15min ]

CLI Prompt (Max=32 Characters) [HP StorageWorks MPX200 ]

All attribute values that have been changed will now be saved.

Set SNMP

Configures general SNMP) properties and eight trap destinations.

Admin sessionAuthority

[trap_destinations]<DEST_NUM>]]set snmpSyntax

Example 1: The following example shows the set snmp command for setting general properties:

MPX200 <1>(admin) #> set snmp

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current value.

If you wish to terminate this process before reaching the end of the list

press 'q' or 'Q' and the ENTER key to do so.

Configuring SNMP :

-----------------

Read Community [ ] Public

Trap Community [ ] Private

System Location [ ]

System Contact [ ]

Authentication Traps (0=Enable, 1=Disable) [Disabled ]

All attribute values that have been changed will now be saved.

Example 2: The following example shows the set snmp command for configuring an SNMP trap

destination:

MPX200 <1>(admin) #> set snmp trap_destinations

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current value.

If you wish to terminate this process before reaching the end of the list

press 'q' or 'Q' and the ENTER key to do so.

Configuring SNMP Trap Destination 1 :

-------------------------------------

Destination enabled (0=Enable, 1=Disable) [Disabled ] 0

IP Address [0.0.0.0 ] 10.0.0.5

Destination Port [0 ] 1024

Trap Version [0 ] 2

Configuring SNMP Trap Destination 2 :

-------------------------------------

Destination enabled (0=Enable, 1=Disable) [Disabled ]

Configuring SNMP Trap Destination 3 :

-------------------------------------

174 Command reference

1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 257 258

Comentários a estes Manuais

Sem comentários

Hp MPX200 Multifunction Router Manual do Utilizador Página 174

Comentários a estes Manuais

Manuais e produtos relacionados com Armazenamento Hp MPX200 Multifunction Router