Hp MPX200 Multifunction Router Manual do Utilizador Página 44

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 258
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 43
3. Perform a Discovery of an iSCSI port on each MPX200 blade from the initiator to register the
initiator IQN.
4. Download, install, and run the mpx Manager.
NOTE: Although you can accomplish LUN masking using either the mpx Manager GUI or
the command line, the mpx Manager is the preferred method.
5. Connect to the management port of one of the blades.
6. Select the blade, and then select WizardsLUN Presentation Wizard to start LUN Presentation
Wizard. This must be done for each blade. See Figure 38 (page 44).
Figure 38 mpx Manager LUN Presentation Wizard
7. Select the initiator, and then click Next.
The selected array appears in a LUN Selection window.
8. Expand the tree, select the LUN that you want to present, and then click Next. See
Figure 39 (page 44).
Figure 39 LUN Selection window
9. Click Finish to complete the LUN presentation for the selected blade.
10. Repeat Step 6 through Step 9 for each blade.
44 Managing MPX200 iSCSI for 3PAR StoreServ Storage
Vista de página 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 257 258

Comentários a estes Manuais

Sem comentários