HP Hybrid POS Printer with MICR II Manual do Utilizador descarregar pdf (Página 15)

Connecting the cables

NOTE: Place the printer on a level surface and position it in a location that allows access to cables and

provides ample room to open the cover. Locate the printer away from traic areas to limit its chance of being

bumped or damaged.

IMPORTANT: Connect cables to the printer before turning on power to the POS computer. The POS computer

should always be turned o before connecting the communication cable.

1. Turn o the POS computer.

2. Open the connector cover on the rear of the printer and locate the USB power port (1).

3. Plug the printer end of the USB power cable (3) into the USB power port on the printer.

4. Plug the other end of the USB power cable (4) into the USB power port on the POS computer.

5. Plug one end of the cash drawer cable into the cash drawer port on the printer (2) and plug the other end

of the cash drawer cable into the port on the cash drawer.

NOTE: The cash drawer cable is not included with the printer.

6. Close the connector cover on the rear of the printer, ensuring that the USB and cash drawer cables are

aligned with the slots provided for each connector.

Installing the driver

Go to http://www.hp.com to download and install the driver for your POS computer's operating system.

Connecting the cables 9

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 44 45

Sem comentários

HP Hybrid POS Printer with MICR II Manual do Utilizador Página 15