HP Value Serial/USB Receipt Printer II Manual do Utilizador Página 30

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 155
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 29
Chapter 3: Programming Commands30
Command conventions
Thefollowinginformationdescribeshoweachcommandisorganized:
Name: Name of command.
ASCII: The ASCII control code.
Hexadecimal: The hexadecimal control code.
Decimal: The decimal control code.
Value: A description of the command operands.
Range: The upper and lower limits of the command operand.
Default: The command operand default after printer reset.
Description: Brief description and summary of the command.
Formulas: Any formulas used for this command.
Exceptions: Describes any exceptions to this command; for example, incompatible commands.
Related information: Describes related information for this command; for example, bit information.
Command descriptions
Printer actions
The printer function commands control the following basic printer functions and are described in order of their
hexadecimalcodes:
• Resettingtheprinter
• Cuttingthepaper
• Openingthecashdrawers
Clear printer
ASCII DLE
Hexadecimal 10
Decimal 16
Clearstheprintlinebufferwithoutprintingandsetstheprintertothefollowingcondition:
• Double-widecommand(0x12)iscanceled
• Linespacing,pitch,anduser-denedcharactersetsaremaintainedatcurrentselections(RAMisnotaffected)
• Single-wide,single-high,non-rotated,andleft-alignedcharactersareset
• Printingpositionissettocolumnone
Related Information
Thiscommandfollowedbya04or05isinterpretedasa“RealTimeCommand”
ThiscommandisrecognizedinA793emulationandNativemode,ignoredinLEGACYemulation.
Perform full knife cut
ASCII EM ESC i
Hexadecimal 19 1B 69
Decimal 25 27 105
Cuts the receipt.
Therearetwocodes(Hex19or1B69)forthiscommandandbothperformthesamefunction.
Exceptions
ThefullcutisreplacedbyapartialcutintheA793emulation.ASCIIEM,(0x19)isignoredinLEGACYemulation.Line
feedisexecutedrst,ifthebufferisnotempty.
Vista de página 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 154 155

Comentários a estes Manuais

Sem comentários