HP Value Serial/USB Receipt Printer II Manual do Utilizador Página 96

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 155
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 95
Chapter 3: Programming Commands96
Set GS1 DataBar parameters
Setting of parameters for GS! DataBar
ASCII GS q a b c d e fL fH
Hexadecimal 1D 71 a b c d e fL fH
Decimal 29 113 a b c d e fL fH
a byte pixels per minimum unit, default 3, minimum 2, maximum 6
(value a applies to parameters b, c, d)
b byte X undercut, default 0, can be set 0 to a-1
c byte Y undercut, default 0, can be set 0 to a-1
d byte separator height, default a, can be set a to a*2
e byte segment width, used only by GS1 DataBar Expanded, default 22,
must be even number 2 to 22
f word line height, used only by UCC128, default 25, can be set 1 to 500
Note:ForGS1DataBarcommands,consultISO/IEC24721.Forfurtherinformation,visitwww.gs1.org.
Select PDF 417 parameters
ASCII GS p a b c d e f
Hexadecimal 1D 70 a b c d e f
Decimal 29 112 a b c d e f
Value and Ranges:
Value: Ranges: Description:
a, b = The ratio of bar height to symbol length.
a = height limit 1 to 10
b = width limit 1 to 100
c = rows limit 3 to 90 Number of rows in the matrix of code words.
d = columns limit 7 to 30 Number of columns in the matrix of code words.
e = x dimension limit 1 to 7 Width of a single module in dots.
f = y dimension limit 2 to 25 Height of the code word in dots.
Defaults: a = 1
b = 2
c = 58
d = 7
e = 3
f = 10
PDF417isamulti-row,continuous,variablelengthsymbologywhichhashighdatacapacity.Eachsymbolhasbetween3
and90rows,witheachrowcontainingastartpattern,aleftrowindicator,1to30datacharacters,arightrowindicatorand
astoppattern.Thenumberandlengthoftherowsareselectable,whichallowstheaspectratiotobeadjustedtoparticular
labeling applications. There are no separator bars between rows.
Eachcharacterhasfourbarsandfourspaceswithin17modules,andisassignedavaluebetween0and928.Forthis
symbology,itiscommontorefertothesecharactervaluesas“codewords.”
Vista de página 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 154 155

Comentários a estes Manuais

Sem comentários