HP Value Serial/USB Receipt Printer II Manual do Utilizador Página 63

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 155
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 62
Chapter 3: Programming Commands 63
Select the current logo
ASCII GS # n
Hexadecimal 1D 23 n
Decimal 29 35 n
Range of n: 0 – 255
Default: 0
Selectsamonochromelogotobedenedorprinted.Theactivelogon remains in use until this command is sent again
with a different logo n.
Whenthiscommandprecedesalogodenition,thatdenitionisstoredinashorRAMmemoryaslogon.Ifthereis
alreadyadifferentdenitioninashmemoryforlogon,therstisinactivatedandthenewdenitionisused.Theinactive
denitionisnoterasedfromashandcontinuestotakeupspaceinashmemory.
When this command precedes a logo print command and nisdifferentfromthepreviouslyactivelogoselected,theprinter
retrievesthelogodenitionfornfromashorRAMmemoryandprintsit.Ifthereisnodenitionforlogon,thennologo
is printed.
Inthecaseofapreviouslyexistingapplicationthatexpectsonlyonepossiblelogo,theprinterwillnotreceivetheselect
currentlogo(1D23n)command.Inthiscase,theprinterassigns0astheactivelogoidentier.Itautomaticallystores
anynewlogodenitioninashmemoryaslogo0,inactivatinganypreviouslogo0denition.Iftheashmemoryspace
availableforlogosllsupwithinactivelogo0denitions,thermwareerasestheolddenitionsatthenextpowercycle.
Thisistheonlycaseinwhichtheprintererasesashmemorywithoutanapplicationcommand.
Inthecaseofanewapplicationusingmultiplelogos,theselectcurrentlogo(1D23n)commandisused.Afterthat,the
printernolongerautomaticallyerasesthelogodenitionashmemorypagewhenitllswithmultipledenitions.Anew
applicationusingmultiplelogos,writingauser-denedcharactersetintoashmemory,orboth,isresponsibleforerasing
thelogoanduser-denedcharactersetashmemorypagewhenthelogoareaisfullorbeforeanewcharactersetis
dened.
Related information
ThiscommandisrecognizedinNativemode.
InA793andLEGACYemulations,theparametersareputintotheprintbuffer.
Vista de página 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 154 155

Comentários a estes Manuais

Sem comentários