HP 600N Manual de Instalação descarregar pdf (Página 21)

Installing the Print Server 2-7

Installing the

Print Server

Step 4. Turn Off Your Printer and

Insert the Card

Figure 2-2 Typical Card Installation and Network Connection

1. Turn off the printer (or mopier).

2. Identify an available HP Enhanced I/O (EIO) slot in the back of

the printer.

Note You can install the card into any EIO slot in the

HP printer or mopier.

3. If the slot has a cover plate, remove it.

4. Insert the card. Align the card with the guide rails in the slot.

5. Press the card into the slot until firmly seated and tighten each

retaining screw a little at a time until both screws are secure.

6. Connect the network cable to the card.

RJ-45

BNC

S00eiohw.book Page 7 Thursday, February 24, 2000 2:26 PM

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 53 54

Sem comentários

HP 600N Manual de Instalação Página 21