HP 600N Manual de Instalação descarregar pdf (Página 22)

2-8 Installing the Print Server

Note For the HP J3111A Ethernet card, you can connect

to the LocalTalk port and to only one of the Ethernet

ports (RJ-45 or BNC).

For the HP J3112A Token Ring card, you can

connect to only one of the Token Ring ports

(RJ-45 or DB 9).

7. Turn on the printer (or mopier).

Step 5. Verify That the Card Was

Installed Correctly

1. Print another Printer Configuration Page (or Service

Configuration print) as described previously in Step 3 and verify

that JetDirect Configuration Page information also prints.

In HP LaserJet printers, a JetDirect Configuration Page will

print for each EIO slot that contains an HP JetDirect card.

2. In the General Information section of the JetDirect

Configuration Page, locate the message “I/O CARD READY”.

This section of the configuration page also contains product-

specific information, such as:

■

HP JetDirect product number

■

Firmware revision number

■

LAN Hardware (MAC) address

■

Manufacturing identification number

Note For a description of other messages that may appear

on the JetDirect Configuration Page, refer to the

HP JetDirect administrator’s guide located on the

HP JetDirect CD-ROM.

S00eiohw.book Page 8 Thursday, February 24, 2000 2:26 PM

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 53 54

Sem comentários

HP 600N Manual de Instalação Página 22