HP 600N Manual de Instalação descarregar pdf (Página 43)

HP J3113A 10/100Base-TX Print Server A-1

HP J3113A 10/100Base-TX Print

Server

Supported Links

HP J3113A 10/100 Base-TX print servers support 10 or 100 Mbps

operation using full-duplex or half-duplex transmission channels.

When connecting to network devices that do not support

autonegotiation, the print server will configure itself for 10-Mbps

or 100-Mbps half-duplex operation. For example, when connected

to a non-negotiating 10 Mbps hub, the print server card will

automatically set itself to operate at 10-Mbps half-duplex.

If the card is not able to connect to the network through

autonegotiation, you can manually set the link operating mode

using link configuration jumpers (P1, P2, and P3) on the card.

Link-Speed LEDs

The HP J3113A print server provides 2 light-emitting diodes

(LEDs) near the RJ-45 connector. These LEDs indicate the

operating link speed of the print server.

LED State Description

Off Not linked

On Link established

at either 10 Mbps

or 100 Mbps

LEDs

S00eiohw.book Page 1 Thursday, February 24, 2000 2:26 PM

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 53 54

Sem comentários

HP 600N Manual de Instalação Página 43