HP Integrity NonStop H-Series Guia do Utilizador descarregar pdf (Página 37)

HP NonStop Shadowbase Command Definitions

Monitor Command Descriptions

HP NonStop Shadowbase Command Reference Manual—785421-002

Note: The total does not include the number that have timed out because

a pulse can subsequently complete even though it has timed out.

As with the AUDCOM STATS command, the PULSESTATS command

supports the INTERVAL parameter. This is used to repeat the

PULSESTATS request at intervals. It is subsequently terminated by

hitting the break key.

The syntax for the PULSESTATS command is as follows:

PULSESTATS [/OUT <listfile>/] {[COLL] {<collname>}

{* }}

{[CONS] {<consname>}

{* }}

{[CONSGROUP] {<consgroupname>}}

[,FROM <date-time>]

[,TO <date-time>]

(format [YYYY-MM-DD]:HH:MM)

[,INTERVAL <num> {HRS}

{MINS}

{SECS}]

RESET AUD Command

The RESET AUD command resets a HP Shadowbase AUD object

parameter from the currently set value to the default system value.

RESET [ AUD ] [aud_parameter [ , aud_parameter]]

aud_parameter options can be found in the SET AUD section.

If aud_parameter is omitted, values for all these parameters are reset.

See SET AUD Command description, below, for details of the various

aud_parameters.

RUN Command

The RUN command starts execution of the HP Shadowbase system

following the configuration and startup of its components. It is typically the

last command in the configuration file and is necessary following a cold

start. Processing will not commence until this command is issued. The

syntax is:

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 345 346

Sem comentários

HP Integrity NonStop H-Series Guia do Utilizador Página 37