HP Integrity NonStop H-Series Guia do Utilizador descarregar pdf (Página 89)

HP NonStop Shadowbase Command Definitions

Collector Command Descriptions

HP NonStop Shadowbase Command Reference Manual—785421-002

to ON, this indicates to log the “age clear” messages to EMS. The default

is OFF to disable logging.

MAXCONSWRITES number

Initial Changed

Version Version Values Default Minimum Maximum Alter

2.000 1 1 15 No

Is the maximum number of simultaneous interprocess messages I/Os that

can be outstanding to a Consumer (Guardian “nowaited” I/O). This

number can be from 1 to 15 (15 is the largest Guardian nowaited I/O

depth). The default is 1, which means that each message must be replied

to before the next one can be sent (i.e.,i.e., interprocess communications

is synchronous).

Increasing this value will allow HP Shadowbase to take advantage of

parallelism, and improve the overall efficiency of your environment

(i.e.,i.e., interprocess communications is asynchronous).

In a BASIC/EXTENDED Consumer configuration, if the BASIC Consumer

is set for CONTROLTYPE SERIAL, MAXCONSWRITES has no meaning

because only one message is written at a time.

If you will be replicating to an HP Shadowbase Other Servers and wish to

take advantage of asynchronous communication, this parameter should

be set greater than 1, and the CONS NETBUFFERS parameter should be

increased accordingly. (See SET CONS NETBUFFERS for more

information on asynchronous communication.)

MAXQMGR number

Initial Changed

Version Version Values Default Minimum Maximum Alter

4.090 0 0 255 No

Is the maximum number of Queue Managers with which the Collector can

communicate. The Queue Manager is an optional component of HP

Shadowbase: default value is 0, no Queue Managers are connected to

the Collector. The sum of MAXQMGRS for all Collectors may not exceed

the value specified in the SET AUD MAXQMGRS command. If the

Collector is to communicate with a QMGR, this value must be set.

MEASURE { ON }

{ OFF }

Initial Changed

Version Version Values Default Minimum Maximum Alter

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 345 346

Sem comentários

HP Integrity NonStop H-Series Guia do Utilizador Página 89