
HP NonStop Shadowbase Command Definitions
Monitor Command Descriptions
HP NonStop Shadowbase Command Reference Manual—785421-002
36
STATICTMFSERVE { ON }
{ OFF }
Initial Changed
Version Version Values Default Minimum Maximum Alter
2.000 OFF OFF ON Yes
Tells AUDMON whether to use a static TMFSERVE process (when set to
ON) or a dynamic TMFSERVE process (when set to OFF) to get
information about the TM/MP environment. It defaults to OFF.
STATSRESET { ON }
{ OFF }
Initial Changed
Version Version Values Default Minimum Maximum Alter
4.070 OFF OFF ON Yes
This parameter defines if automatic statistics resets will be performed.
When OFF (the default), statistics will accumulate until the RESET option
is requested with STATS AUD, STATS COLL or STATS CONS command.
When ON (enabled), statistics will be reset based upon the method
defined by the STATSRESETTIME parameter. The STATSRESET
parameter can be altered at any time.
STATSRESETTIME {[MONTH {(1,2,...,12 )}
{(ALL)}}]
{[,{DAY {(1,2,...,31)}
{(DAILY)}}
{WKDAY {(1,2,...,7)}
{(WEEKDAY)}}]}
Initial Changed
Version Version Values Default Minimum Maximum Alter
4.070 OFF OFF ON Yes
This parameter defines the day and time the next COLL and CONS
processing statistics reset is to occur. The default value is DAILY at
00:00. Either the MONTH, DAY/WKDAY, and HOUR clauses may be
specified, OR the MINUTE clause may be specified. The
STATSRESETTIME parameter can be altered at any time.
If MONTH (ALL) is entered, the reset will occur each month on the
specified days at the specified times. You can also enter the
numbers of the months in which the resets are to occur. For
example, enter SET AUD STATSRESET MONTH (2,4,6,8,10,12),
DAY (1) to reset statistics at midnight (the default) on the first day
of every February, April, June, August, and October.
Comentários a estes Manuais