Hp NetRAID-4M Controller Manual do Utilizador descarregar pdf (Página 111)

6-5

Working with Container Attributes

Displaying, Assigning, and Removing a Drive Letter

(Windows Only)

The drive letter attribute identifies the drive letter associated

with a container. Drive letters do not automatically get assigned

when you create a container. Some operations, for example, adding

a file system to a container, require that you assign a drive letter to a

container.

The CLI allows you to do the following:

■ Display a drive letter assigned to a container

■ Assign a drive letter to a container

■ Remove a drive letter from a container

Displaying a Drive Letter Assigned to a Container

To display a container’s drive letter, use the container list

command, as in the following example. In the example, the Dr

column is blank, which indicates that no drive letter is assigned to

container 0. Note that the Dr column appears only if you are

running the CLI on the Windows NT or Windows 2000 (basic disks

only) operating system.

HPN0> container list

Executing: container list

Cluster Num Total Oth Stripe Scsi Partition

Dr Partner Label Type Size Ctr Size Usage C:ID:L Offset:Size

-- -------- ----- ------ ------ --- ------ ------- ------ -------------

0 0 Volume 30MB None 2:01:0 64KB: 15MB

2:02:0 64KB: 15MB

Assigning a Drive Letter to a Container

To assign a drive letter to a container, use the container assign

drive_letter command, as in the following example. In the

example, drive letter F is assigned to container 0.

HPN0> container assign drive_letter 0 F

Executing: container assign drive_letter 0 "F"

Drive Letter F: assigned to Container 0

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 335 336

Sem comentários

Hp NetRAID-4M Controller Manual do Utilizador Página 111