Hp NetRAID-4M Controller Manual do Utilizador descarregar pdf (Página 89)

5-11

Working with Disksets

Creating a Diskset

You use the disk_set create command to create a diskset. When

you create a diskset, you specify the disks that are to comprise the

diskset. Only disksets, not individual disks, can be attached to a

controller in a cluster environment. See the Flexible Storage Array Tool

User’s Guide for information on diskset concepts. Once a diskset has

been created, it must be attached to a controller before it can be used.

See Attaching a Diskset on page 5-18 for information on attaching a

diskset.

Before creating a diskset, use the disk_set list command to

display information about your disksets, as in the following

example. In the example, the columns are blank, indicating that no

diskset exists. Note that the example alters the disk_set list

output so that the data can fit on the page.

HPN0> disk_set list

Executing: disk_set list

Diskset ID Creator ID Owner

------------------- ------------------ ------------------

Disks Attached OS Managed Label Shared Spare

------ -------- ---------- ---------- ------ -----

To create a diskset, use the disk_set create command with the

/label switch, as in the following example. In the example, a

diskset is created using SCSI devices (2,0,0) and (2,1,0). The /label

switch assigns Saturn as the diskset label. The command assigns the

diskset a Diskset ID of 0x01be868c1d74a640 and an Ownership ID

of \\.\HPN0.

HPN0> disk_set create /label=Saturn (2,0,0) (2,1,0)

Executing: disk_set create /label="Saturn"

(CHANNEL=2,ID=0,LUN=0) (CHANNEL=2,ID=1,LUN=0)

Diskset ID

------------------------------------

\\.0x01be868c1d74a640 \\.\HPN0

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 335 336

Sem comentários

Hp NetRAID-4M Controller Manual do Utilizador Página 89