
6-20
Command Line Interface User’s Guide
0 0 Volume 15MB None 2:01:0 64KB: 15MB
0 1 Stripe 45MB 32KB None 2:02:0 64KB: 15MB
2:03:0 64KB: 15MB
2:04:0 64KB: 15MB
You set the stripe size of a container when performing the following
operations:
■ Creating a multi-level stripe set (container create
mstripe command)
■ Creating a RAID-5 set (container create raid5
command)
■ Creating a stripe set (container create stripe
command)
■ Reconfiguring a container (container reconfigure
command)
For information on the container create mstripe command,
the container create raid5 command, and the container
create stripe command, see Chapter 7, Working With Single-level
Containers and Chapter 8, Working with Multi-level Containers. For
information on the container reconfigure command, see
Chapter 9, Modifying Containers.
Understanding Container Access Attributes
The container access attributes indicate a container’s
availability. Table 6-6 lists the container access attributes, the CLI
operations associated with these attributes, the CLI commands you
use to perform these operations, and the section that describes the
operation.
Comentários a estes Manuais