Hp NetRAID-4M Controller Manual do Utilizador descarregar pdf (Página 154)

7-4

Command Line Interface User’s Guide

■ Enables the NVRAM write-back cache setting for the specified

volume set if a battery is present and its status is Ok.

If you do not use the /cache switch, you can enable the volume

set’s raw container cache later with the container set cache

command. See Chapter 9, Modifying Containers, for more

information on how to enable a volume set’s raw container cache

after creating it.

Specifying a Label for a Volume Set

The container label attribute identifies the name assigned to a

container. Note that this label is not the label that displays in

Windows Explorer and Disk Administrator. You can specify a

container label while creating a volume set or at a later time using

the container set label command. See Displaying and Setting a

Container Label in Chapter 6, Working with Container Attributes, for a

description of the container set label command.

In the following example, the container create volume

command with the /label switch creates a volume set with the label

Mars.

HPN0> container create volume /label=Mars ((2,1,0), 100M)

Executing: container create volume /label="Mars"

((CHANNEL=2,ID=1,LUN=0), 104,857,600)

Container 0 created

Understanding How to Create a Volume Set

This section provides an example that describes how to create a

volume set.

Before creating a volume set, use the disk show space command

to display information about your disks, as in the following

example. In the example, the Usage column indicates Free for each

disk, which means that the space on each disk consists of freespace.

HPN0> disk show space

Executing: disk show space

Scsi C:ID:L Usage Size

----------- ---------- -------------

2:01:0 Free 64.0KB:8.47GB

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 335 336

Sem comentários

Hp NetRAID-4M Controller Manual do Utilizador Página 154