Hp NetRAID-4M Controller Manual do Utilizador descarregar pdf (Página 29)

3-5

Working with Controllers

the domain name for the NetWare system. The Adapter Name

column indicates that HPN0 is the name of the controller installed

on the computer. The example also indicates the controller’s path,

which is \\.\

HPN0> controller list /domain=D1

Executing: controller list /domain=D1

Adapter Name Adapter Type Availability Clustering

------------ ------------ ------------ ----------

\\.\HPN0 HP NetRAID-4M read/write No

To open a controller on a NetWare system from Windows NT or

Windows 2000 (basic disk only), use the open command with the

/netware and /domain switches, as in the following example. In

the example, the HPN0 controller is opened in the D1 domain on a

NetWare system.

HPN0> open /netware /domain=D1 \\D1\HPN0

To close an open controller, use the close command, as in the

following example:

HPN0> close

A controller can also be closed by exiting from the CLI using the

exit command, as in the following example.

HPN0> exit

After you open a controller, you are ready to work with the

controller attributes. See Understanding Controller Attributes on

page 3-5 for information on how to work with controller attributes

and perform controller tasks.

After you open a controller, you are ready to work with the

controller attributes.

Understanding Controller Attributes

Controllers exhibit a number of attributes or characteristics that you

can administer or display using the CLI. The CLI supports two

commands that provide information about the controller:

controller list and controller details. Table 3-1 lists the

controller attributes and their related CLI commands.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 335 336

Sem comentários

Hp NetRAID-4M Controller Manual do Utilizador Página 29