HP 4400 Guia de Instalação descarregar pdf (Página 23)

Figure 12 Disk drive numbering

CAUTION:

Install hard drives in the enclosures only after securing the enclosures in the rack:

• An enclosure populated with hard drives is too heavy to lift safely.

• Movement of an enclosure during installation might damage the internal storage media of installed

hard drives.

CAUTION:

Follow industry-standard practices when handling hard drives. Internal storage media can be damaged

when drives are shaken, dropped, or roughly placed on a work surface. When installing a hard

drive, make sure it is fully seated in the drive bay. To remove a hard drive, press the release button

and pull the drive only slightly out of the enclosure. Then, to allow time for the internal disk to stop

rotating, wait approximately 10 seconds before completely removing the drive from the enclosure.

To install the hard drives:

1. Insert the disk drive into the drive bay (1, Figure 13) until it clicks, locking the drive.

2. Rotate the drive lever to the right (2, Figure 13) until it locks.

Figure 13 Installing drives into the enclosures

HP StorageWorks 4400 Enterprise Virtual Array Installation Guide 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Sem comentários

HP 4400 Guia de Instalação Página 23