HP 4400 Guia de Instalação descarregar pdf (Página 38)

2. Click Use management module server.

The logon window appears.

3. Enter the username and password for accessing HP Command View EVA.

Changing the default operating mode

By default, the EVA4400 is shipped to operate in a Fibre Channel switch environment and is configured

in fabric mode. If you choose to connect the EVA4400 directly to a server, you must change the

default operating mode of the EVA4400 to direct mode. If you do not change this mode, the EVA4400

will be unable to communicate with your server. Use the web-based operator control panel (WOCP)

to change the default operating mode.

NOTE:

Change your browser settings for the WOCP window as described in the

HP StorageWorks Command

View EVA Installation Guide

. You must have administrator privilege to change the settings in the

WOCP.

To change the default operating mode:

1. Connect to the management module using one of the methods described in Connecting through

a public network or Connecting through a private network.

2. Log into the WOCP as an administrator. The default username is admin and the password field

is blank. For security reasons, change the password after you log in.

3. Select Administrator Options > Configure controller host ports.

The WOCP is displayed (Figure 19).

Connecting to the management module38

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

Sem comentários

HP 4400 Guia de Instalação Página 38