HP 4400 Guia de Instalação descarregar pdf (Página 32)

NOTE:

For complete switch configuration and management instructions, see the

HP StorageWorks Fabric

OS 6.1.x administrator guide

at: http://www.hp.com/support/manuals. Under Storage, click

Disk Storage Systems and then click HP StorageWorks 4400 Enterprise Virtual Array under EVA

Disk Arrays.

To configure an embedded switch in an HSV300-S controller:

1. Obtain a laptop and an Ethernet cable (straight-through or crossover type), and change the IP

address of the laptop to have an address in the same IP range as the embedded switch (for ex-

ample 10.77.77.79, with a subnet mask of: 255.255.255.0).

NOTE:

The embedded switch has an MDI-X port that supports straight-through or crossover Ethernet

cables. Use a Cat 5e or greater cable.

If needed, you can connect directly to the switch using the console port (2, Figure 16) and the

provided console cable (manufacturing part number 259992–001). You may need a USB adapter

for this cable if your laptop does not have a serial port.

2. Connect the Ethernet port (2, Figure 16) of the embedded switch to the laptop.

Figure 16 HSV300-S rear view

1. Console port

2. Ethernet port

3. Browse to http://10.77.77.77 for the Controller 1 switch.

NOTE:

Fibre Channel switches are referred to as

left slot switch

and

right slot switch

in Brocade Web

Tools.

The switch management GUI (Brocade Web Tools) appears (Figure 17).

Turn on power32

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 55 56

Sem comentários

HP 4400 Guia de Instalação Página 32