HP Modular Cooling System Guia de Início Rápido descarregar pdf (Página 68)

Facility planning for implementation 68

Recommended plumbing configuration for the MCS-200/100

Typical plumbing components for an MCS-200/100 configuration

Item Description Specifications

Chilled water return line

Pipe: 31.75-mm (1.25-inch), ASTM B 88, Type L, hard-drawn copper

Fittings: ASTM B16.22 Wrought copper

Solder: ASTM B 32, 95-5 Tin Antimony

Thread sealant: seal and assemble according to local materials and

practices

Flow/measurement

balancing valve

Valve type: 31.75-mm (1.25-inch) bronze balancing valve, ball design,

with positive shutoff, integral checked metering ports, adjustable knob,

memory device, calibrated nameplate, integral drain port, and solder

end connections

Position: horizontal run of pipe

Orient drain port toward MCS-200/100. Avoid fittings closer to

measurement valve than five pipe diameters upstream and two pipe

diameters downstream for maximum performance.

Watts CSM-61 or equivalent, typical 1

Pipe 31.75 mm (1.25 inches) copper, male (NPT or BSPP) adapter to

connect the MCS-200/100 water hoses, typical 2

Isolation valves Valve type: 31.75-mm (1.25-inch), two-piece, full-port, brass ball valve,

with chrome plated brass ball, PTFE seats, steel handle, with female

connections and 31.75-mm (1.25-inch) bushing on the end toward

MCS-200/100 hoses.

Pressure rating: 600 psi WOG, 150 psi WSP

Watts FBV-3C or equivalent

Chilled water supply

line

Pipe: 31.75-mm (1.25-inch), ASTM B 88, Type L, hard-drawn copper

Fittings: ASTM B16.22 Wrought copper

Solder: ASTM B 32, 95-5 Tin Antimony

Thread sealant: Seal and assemble according to local materials and

practices

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 92 93

Sem comentários

HP Modular Cooling System Guia de Início Rápido Página 68