
Service Calibrations
5-7
HP DesignJets 500, 510 and 800 Series Printers Service Manual
Color Calibration
The purpose of this Calibration is to calibrate the ink system for the
specific media loaded into the Printer. The Printer stores the
calibration data for each type of media that has been calibrated since
the Printer was switched ON. If the Printer is switched OFF, it will
only store the last calibration done.
Perform the Color Calibration as follows:
NOTE Make sure you load media before performing this calibration.
1 In the Service Calibrations submenu, scroll to "Color calibration"
and press Enter.
1 In the Color Calibration submenu, scroll to "Calibrate paper" and
press Enter.
2 The Printer will start to print the calibration pattern and the
following message will be displayed on the front panel:
3 Once the Color Calibration is completed, the following message
will be displayed on the front panel:
Menu
Back
Enter
Service calibrations
Align printheads
Color calibration
Advance calibration
Factory advance cal.
Menu
Back
Enter
Color calibration
Status
Calibrate paper
Reset
Calibrating color.
Please wait
Calibration finished
successfully.
Press ENTER to continue
Menu
Back
Enter
Comentários a estes Manuais