HP CH336A#B1K Manual do Utilizador descarregar pdf (Página 94)

Service Tests and Utilities

4-24

HP DesignJets 500, 510 and 800 Series Printers Service Manual

Prime Tubes

This purpose of this Service Utility is to prime the Ink Supply Tubes

after they have been replaced (or if a situation arises where you need

to force the priming procedure).

Prime the tubes as follows:

1 In the Service Utilities submenu, scroll to "Prime tubes" and press

Enter.

2 Once the utility starts, the printer will display the following message

on the front panel. If you want to abort the Prime Tubes utility, press

Cancel and you will return to the Service Utility menu.

3 If you press Enter, the following message will be displayed on the

Front Panel. You should switch the Printer ON and OFF in order to

start the priming process.

4 When you power On the Printer, the Printer will initialize and then

display the following message. You will need to remove the normal

Printheads and replace them with Start-up Printheads.

Back

Enter

Service utilities

Change ink tubes

Unlock Carriage

Turn Drive Roller

Prime tubes

EEROM Setup

Prime tubes

Press ENTER to force

tube priming at next

power up.

CANCEL to abort

Prime tubes

Power off/on machine

to start tube priming

Open window and

remove normal

printheads to prepare

ink system

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 284 285

Sem comentários

HP CH336A#B1K Manual do Utilizador Página 94