HP CH336A#B1K Manual do Utilizador Página 108

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 107
Service Calibrations
5-9
HP DesignJets 500, 510 and 800 Series Printers Service Manual
Advance Calibration
The purpose of this Service Calibration is to calibrate the nominal
advance of the media. This calibration is necessary to control the
exact movement on the media type that will be used (upto 2) in
order to avoid print quality problems like banding.
Perform the Advance Calibration whenever:
Banding is detected in prints.
Printheads Diagnostic is OK.
Perform the Advance Calibration as follows:
1 In the Service Calibrations submenu, scroll to "Advance
calibration" and press Enter.
2 When the following message appears on the front panel, select
"Create pattern" and press Enter.
3 If media is not loaded, the following message appears on the front
panel and you must load media into the Printer.
4 The Printer will start to print the Accuracy Calibration Pattern and
the following message will be displayed on the front panel:
Menu
Back
Enter
Service calibrations
Align printheads
Color calibration
Advance calibration
Factory advance cal.
Menu
Back
Enter
Advance calibration
Restore factory
Measure pattern
Create pattern
Paper not present.
Load paper to print
calibration pattern
Press ENTER to continue
Calibrating
Job management menu
Vista de página 107
1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 284 285

Comentários a estes Manuais

Sem comentários