
System Error Codes
2-10
HP DesignJets 500, 510 and 800 Series Printers Service Manual
System Error: 05:10 Error (Only applicable to HP DesignJet 500 and 510
Series)
Problem
Description:
HP-GL/2 Accessory Card failure.
Corrective Action: Power OFF the Printer and replace the HP-GL/2 Accessory Card ⇒
Page 8-20.
System Error: 05:11
Problem
Description:
Formatter not detected.
Corrective Action: Power OFF the Printer and reconnect the Formatter.
System Error: 08:11
Problem
Description:
Front Panel cannot be detected.
Corrective Action: Reconnect the Front Panel.
System Error: 11:11
Problem
Description:
Trailing Cable badly connected.
Corrective Action: Reconnect the Trailing Cable correctly.
System Error: 11:13
Problem
Description:
Problem with setting the voltage of the Printheads.
Corrective Action: Try the following:
Check that the Trailing Cable is connected correctly at both ends.
Replace the Trailing Cable ⇒ Page 8-40.
Replace the Carriage Assembly ⇒ Page 8-78.
Comentários a estes Manuais