HP 2000CP 2500CP Manual do Utilizador descarregar pdf (Página 234)

100

101

Removal and Installation

8-13

HP DesignJet CP Series Printers

Installation

1. Pull the power switch cable through the hole in the electronics module,

then push the rocker switch (item 11) into the hole securing it with

retaining clips.

2. Connect the power switch cable (item 10) to position J2 on the power

PCA.

3. Connect the hard disk power cable (item 8) to position J15 HDD PWR

on the main PCA.

4. Connect the hard disk power cable (item 7) to the hard disk driver.

5. Connect the data cable (item 6) to position J22 Hard Disk Drive on the

main PCA

6. Connect the data cable (item 5) to the hard disk drive.

7. Install the black polystyrene hard disk holder (item 3) with the hard disk

drive (item 4) inside into the correct position in the electronics module.

8. Install eight screws (item 1) into the electronics cover (item 2) securing it

to the electronics module. Be careful not to damage the sheet metal MIO

gasket which surrounds the centronics port.

9. Connect the power cord and turn the printer on in service mode.

10. Perform the C10 Font Type Set calibration  page 5-20 (Only for

Asian Fonts).

11. Perform the D01 Electronics service test  page 4-7.

1 2 ... 229 230 231 232 233 234 235 236 237 238 239 ... 347 348

Comentários a estes Manuais

Sem comentários

HP 2000CP 2500CP Manual do Utilizador Página 234

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir HP 2000CP 2500CP