HP Apollo 9000 400t Manual de Serviço Página 102

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 296
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 101
4-32 Fault Isolation
4.7 Hewlett-Packard Boot ROM Functions
A Series 400 Boot ROM, Revision 1, is used in the Series 400 system units for the HP-
UX Compatible Mode. The Boot ROM is on the CPU board. When the system unit is
turned on, these Boot ROM instruction sets are executed by the CPU:
Power-Up Sequence.
Default Configure Mode. Configuring the system unit’s information is in Ap
-
pendix A.
Test Mode.
Booting the Operating System.
4.7.1 Display Types
Two display types are used with Series 400 systems:
Monitors connected to video board outputs
Terminals connected to the CPU boards RS-232 interface
If your system uses a terminal connected to the system unitss RS-232 interface,
display updates appear at the bottom of the screen. Older information scrolls up. New
information appears with the screen’s uppermost line that changed and all lines below
that appearing at the screens bottom.
For example, at turn-on, the screen appears as shown in Subsection 4.7.2. If your ter
-
minal uses 32 display rows and you turn on and then reset the system unit, then reset it,
your screen shows the bottom few lines of the power-up display at its top. After reset
-
ting, the power-up display appears below those lines.
Vista de página 101
1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 295 296

Comentários a estes Manuais

Sem comentários