HP Apollo 9000 400t Manual de Serviço Página 284

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 296
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 283
D-2 Connecting Terminals
4. You are now ready to connect theeld terminal to the system and access the
MD.
D.2 Using a Workstation as a Terminal
If you need to use another workstation to emulate a terminal, type the following next to
the
$ shell prompt:
$emt < RETURN >
When you receive theemt > prompt, enter the following three command lines:
emt > line1 < RETURN >
emt > raw
emt > tctl -line1 -default < RETURN >
The workstation replies with the message
emt > EMT remote node .... F1 to exit
To enter Terminal mode (Remote mode), press the F1 function key.
You are now ready to connect a cable from SIO line 1 on the EMT system to an SIO
port on the system that you need to access. You need to use an RS-232 extension cable
because the systems SIO output is configured as a DTE. Use a null modem between
the two systems. When you arenished using the node in the Remote mode, press the
F1 function key to exit emt.
NOTICE: The maximum SIO cable length must not exceed 15.24 m
(50 ft).
Vista de página 283
1 2 ... 279 280 281 282 283 284 285 286 287 288 289 ... 295 296

Comentários a estes Manuais

Sem comentários