HP Apollo 9000 400t Manual de Serviço descarregar pdf (Página 252)

B-4 Conﬁ guring Domain/OS Systems

B.2 Selecting the Primary Network

Perform Procedure B-2 to select the primary network for the system. If you are select-

ing a primary network for a diskless system, select the same primary network used by

the partner node.

Procedure B-2. Selecting the Primary Network

1. Stop any user processes and log out.

2. Shut down to the MD prompt by typing the following at the

3. From the MD prompt > type

> pnet

x < RETURN >

where

x corresponds to one of the following values:

e for 802.3 network

r for Apollo Token Ring network

t0 for 802.5 network with network controller 0

t1 for 802.5 network with network controller 1

If the system uses two 802.5 network controller boards, you must specify con

troller 0 (t0) or controller 1 (t1) as the primary controller. The default is 0.

4. Use the pnet command to conﬁrm the primary network:

> pnet < RETURN >

and you receive the following system message:

APOLLO TOKEN RING: CONTROLLER = 0

The example display shows the primary network is set to controller 0 for the

Apollo Token Ring network.

1 2 ... 247 248 249 250 251 252 253 254 255 256 257 ... 295 296

Sem comentários

HP Apollo 9000 400t Manual de Serviço Página 252