HP Apollo 9000 400t Manual de Serviço Página 160

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 296
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 159
5-12 FRU Removal and Replacement
5.3.7 CPU Board Removal and Replacement (Model 400t and 400dl)
Perform the following steps to remove the CPU board:
1. Disconnect all external cables to the system and remove the top cover.
2. Remove the graphics controller board and the memory boards from the system
unit.
3. If present, remove the network interface board from the system unit.
4. Disconnect all internal cables connected to the CPU board (see Figure 5-10 for
the locations of the cable connectors). If the system has two disk drives, re
-
move one drive so that you can easily disconnect the disk drive data cables
from the CPU board.
NOTICE: When you disconnect the graphics cable from the
CPU board, note the connector from which you
disconnect the cable (SGC or DIO-II) so that you
reconnect the graphics cable to the correct connec-
tor.
Vista de página 159
1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 295 296

Comentários a estes Manuais

Sem comentários