
SCSI-2 Drive Command Set
Read (Group 1) Command (28H)
Chapter 22-82
Read (Group 1) Command (28H)
This command reads data from the specified logical block address.
NOTE The Mode Select Commands (15H, 55H) impact read, write, format, and
erase commands.
DPO A Disable Page Out bit of 1 instructs the target not to
store readahead data in cache after the read data has
been transferred to the initiator.
A DPO bit of 0 instructs the target it may store
readahead data in the cache after the read data has
been transferred to the initiator.
NOTE The DPO bit is ignored in 9.1 and 5.2 Gbyte capacity drives.
Table 2-75 Read (Group 1) Command CDB
Byte 7 6 5 4 3 2 1 0
0 Operation Code (28H)
1 Logical Unit Number
(0)
DPO FUA Reserved (0) RelAdr
2 Starting Logical Block Address (MSByte)
3 Starting Logical Block Address
4 Starting Logical Block Address
5 Starting Logical Block Address (LSByte)
6 Reserved (0)
7 Transfer Length (MSByte)
8 Transfer Length (LSByte)
9 PBA Reserved (0) Flag Link
Comentários a estes Manuais