HP 220mx Guia do Utilizador descarregar pdf (Página 338)

Autochanger Error Codes

Jukebox Micro-Move Error Codes

Appendix B B-51

Autochanger Error Codes

60 FRU Isolation Test Assumes that something has physically failed,

either electronic or mechanical. A series of

special low-level tests are executed to select the

three (or fewer) FRUs which are most likely to

be at fault. Tests 30, 31, 33, 35, 36, 40, and 50

are executed as a part of the isolation process.

Calibrate Magazines Calculates a min/max clearance for a magazine.

(The selected magazine should be empty.) The

autochanger requires a disk in the mailslot. The

test passes if clearance is 85 encoder counts (1

mm) up and down. (See Info 23 for actual

values.)

If this test is run by SCSI command, set Byte 1

to the magazine number.

The test returns: PASS or FAIL.

Clear Magazine Min/

Max

Clears the value calculated in Test 65.

Calibrate Mailslot Calculates a min/max clearance for the mailslot.

The autochanger requires a disk in the mailslot.

The test passes if clearance is 85 encoder counts

(1 mm) up and down. (See Info 23 for actual

values.)

The test returns: PASS or FAIL.

Clear Mailslot Max/

Min

Clears the value calculated in Test 67.

UPS Test Tests whether or not the UPS is connected

properly.

The test returns PASS if connected properly,

FAIL if the UPS is not connected properly or if

there is no UPS connected.

Table B-13 Sequence Tests (For models 40fx, 80ex, 125ex, and 220mx ONLY)

No. Test Name Description

1 2 ... 333 334 335 336 337 338 339 340 341 342 343 ... 377 378

Sem comentários

HP 220mx Guia do Utilizador Página 338