HP 220mx Guia do Utilizador descarregar pdf (Página 184)

100

101

SCSI-2 Drive Command Set

Write Long Command (DFH)

Chapter 2 2-147

SCSI-2 Drive Commands

Write Long Command (DFH)

This command writes data starting at the specified Logical Block

Address, without using ECC generation circuitry. The ECC field is also

written with data transferred to the drive.

NOTE The 9.1 and 5.2 Gbyte capacity drives cannot Format, Erase, Write, or

Write and Verify 650 Mbyte and 1.3-Gbyte optical disks. The 2.6 Gbyte

capacity drives cannot Format, Erase, Write, or Write and Verify 650

Mbyte optical disks. If this command is issued with any of these drive/

media combinations, a CHECK CONDITION status will result with the

Sense Key/Additional Sense Code set to Data Protect/Write Protected.

Table 2-131 Write Long Command CDB

Byte 7 6 5 4 3 2 1 0

0 Operation Code (DFH)

1 Logical Unit Number

(0)

Reserved (0) RelAdr

2 Starting Logical Block Address (MSByte)

3 Starting Logical Block Address

4 Starting Logical Block Address

5 Starting Logical Block Address (LSByte)

6 Reserved (0)

7 Transfer Length (MSByte)

8 Transfer Length (LSByte)

9 PBA SC Reserved (0) Flag Link

1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 377 378

Comentários a estes Manuais

Sem comentários

HP 220mx Guia do Utilizador Página 184

Comentários a estes Manuais

Manuais e produtos relacionados com Discos rígidos internos HP 220mx