HP 220mx Guia do Utilizador descarregar pdf (Página 334)

Autochanger Error Codes

Jukebox Micro-Move Error Codes

Appendix B B-47

Autochanger Error Codes

16 Drive I/O Test Performs a combination of moves with a pass/fail

result. It moves a cartridge from a randomly-

chosen full slot to a drive, with a random flip. It

then moves the cartridge back to its original slot

with its original orientation. It does this once for

each optical drive. Returns an error code #57H

Invalid Configuration if there are no cartridges

loaded into the unit. Requires one loaded

cartridge; drives must be empty.

Mailslot I/O Performs a combination of moves with a pass/fail

result. It moves a cartridge from the lowest-

numbered full slot to the mailslot with a random

flip. It then moves the cartridge back to its

original slot with its original orientation.

Returns an error code #57H Invalid

Configuration if there are no cartridges loaded

into the unit. Requires one loaded cartridge;

mailslot must be empty.

Speed Factor Setting

Utility

Allows the setting of the speed factor as the first

parameter given. The speed factor determines

how fast the system moves the mechanics. The

number provides 1/Parameter speed (e.g.

Parameter=3 runs the motors at 1/3 of full

speed). This test can only be run from the SCSI

Interface.

Zero Maximum Force

Log

The maximum force log is initialized to all zeros.

Set Speed Factor to

Full Speed

Allows the mechanics to be run at full speed.

Set Speed Factor to

Half Speed

Allows the mechanics to be run at half speed.

Set Speed Factor to

Quarter Speed

Allows the mechanics to be run at quarter speed.

Table B-13 Sequence Tests (For models 40fx, 80ex, 125ex, and 220mx ONLY)

No. Test Name Description

1 2 ... 329 330 331 332 333 334 335 336 337 338 339 ... 377 378

Comentários a estes Manuais

Sem comentários

HP 220mx Guia do Utilizador Página 334

Comentários a estes Manuais

Manuais e produtos relacionados com Discos rígidos internos HP 220mx