HP 7000 dl Router Series Guia do Utilizador descarregar pdf (Página 196)

SROS Command Line Interface Reference Guide Enable Mode Command Set

traceroute <address>

Use the traceroute command to display the IP routes a packet takes to reach the specified destination.

Syntax Description

<address> Optional.

Specifies the IP address of the remote system to trace the routes to.

Default Values

No default value necessary for this command.

Command Modes

> or # Basic or Enable Command Mode

Usage Examples

The following is a sample traceroute output:

#traceroute 192.168.0.1

Type CTRL+C to abort.

Tracing route to 192.168.0.1 over a maximum of 30 hops

1 22ms 20ms 20ms 192.168.0.65

2 23ms 20ms 20ms 192.168.0.1

Sem comentários

HP 7000 dl Router Series Guia do Utilizador Página 196