HP 7000 dl Router Series Guia do Utilizador descarregar pdf (Página 933)

100

101

Common Commands

show running-config

Use the show running-config command to display a text print of all the non-default parameters contained

in the current running configuration file. Use the verbose keyword to display a text print of the entire

configuration (including parameters in their default state). Specific portions of the running-config may be

displayed, based on the command entered.

Variations of this command include the following:

show running-config

show running-config access-lists

show running-config access-lists verbose

show running-config checksum

show running-config interface

show running-config interface

verbose

show running-config interface vlan

show running-config interface vlan

verbose

show running-config policy-class

show running-config policy-class verbose

show running-config qos-map

show running-config qos-map verbose

show running-config verbose

Syntax Description

access-lists Displays the current running configuration for all configured IP access lists.

interface <interface> Displays the current running configuration for a particular interface. Type the

show running-config interface ? command to display a list of valid interfaces.

policy-class Displays the current running configuration for all configured policy classes.

qos-map Displays the current running configuration for all configured QoS maps.

verbose Displays the entire running configuration to the terminal screen (versus only the

*Optionalnon-default values).

checksum Displays the encrypted Message Digest 5 (md5) version of the running

*Optionalconfiguration.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

1 2 ... 928 929 930 931 932 933 934 935 936 937 938 939 940 941

Comentários a estes Manuais

Sem comentários

HP 7000 dl Router Series Guia do Utilizador Página 933

Comentários a estes Manuais

Manuais e produtos relacionados com Redes HP 7000 dl Router Series