HP 7000 dl Router Series Guia do Utilizador descarregar pdf (Página 318)

100

101

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

logging email source-interface <interface>

Use the logging email source-interface command to use the specified interface’s IP address as the source

IP address for email messages transmitted by the unit. Use the no form of this command if you do not wish

to override the normal source IP address.

Syntax Description

<interface> Enter the interface to be used as the source IP address for email messages.

Default Values

No default value is necessary for this command.

Command Modes

(config)# Global Configuration Mode required

Functional Notes

This command allows you to override the sender field in the IP packet. If you have multiple interfaces in

your unit, changing the sender tells the receiver where to send replies. This functionality can also be used

to allow packets to get through firewalls that would normally block the flow.

Usage Examples

The following example configures the unit to use the loopback 1 interface as the source IP for email

messages:

(config)#logging email source-interface loopback 1

1 2 ... 313 314 315 316 317 318 319 320 321 322 323 ... 940 941

Comentários a estes Manuais

Sem comentários

HP 7000 dl Router Series Guia do Utilizador Página 318

Comentários a estes Manuais

Manuais e produtos relacionados com Redes HP 7000 dl Router Series