HP 7000 dl Router Series Guia do Utilizador descarregar pdf (Página 838)

100

101

SROS Command Line Interface Reference Guide HDLC Command Set

ip rip send version [1 | 2]

Use the ip rip send version command to configure the RIP version the unit sends in all RIP packets

transmitted on the interface. Use the no form of this command to restore the default value.

Syntax Description

1 Only transmits RIP version 1 packets on the interface.

2 Only transmits RIP version 2 packets on the interface.

Default Values

By default, all interfaces transmit RIP version 1 (the default value for the version command).

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual

HDLC interfaces (hdlc 1), virtual Frame Relay sub-interfaces (fr 1.20), tunnel

interfaces (tunnel 1), and VLAN interface (vlan 1).

Functional Notes

Use the ip rip send version command to specify a RIP version that overrides the version (in the Router

RIP) configuration. See

version <version> on page 902 for more information.

The SROS only transmits one version (either 1 or 2) on a given interface.

Usage Examples

The following example configures the HDLC interface to transmit only RIP version 2 packets:

(config)#interface hdlc 1

(config-hdlc 1)#ip rip send version 2

1 2 ... 833 834 835 836 837 838 839 840 841 842 843 ... 940 941

Comentários a estes Manuais

Sem comentários

HP 7000 dl Router Series Guia do Utilizador Página 838

Comentários a estes Manuais

Manuais e produtos relacionados com Redes HP 7000 dl Router Series