HP 7000 dl Router Series Guia do Utilizador descarregar pdf (Página 359)

100

101

SROS Command Line Interface Reference Guide DHCP Pool Command Set

default-router <address> <secondary>

Use the default-router command to specify the default primary and secondary routers to use for the

Dynamic Host Configuration Protocol (DHCP) client. Use the no form of this command to remove the

configured router.

Syntax Description

<address> Specifies the address (in dotted decimal notation) of the preferred router on the

client’s subnet (example: 192.22.4.254).

<secondary> Optional. Specifies the address (in dotted decimal notation) of the second

preferred router on the client’s subnet (example: 192.22.4.253).

Default Values

By default, there are no specified default routers.

Command Modes

(config-dhcp)# DHCP Pool

Functional Notes

When specifying a router to use as the primary/secondary preferred router, verify that the listed router is on

the same subnet as the DHCP client. The Secure Router OS allows a designation for two routers, listed in

order of precedence.

Usage Examples

The following example configures a default router with address 192.22.4.253 and a secondary router with

address 192.22.4.254:

(config)#ip dhcp-server pool MyPool

(config-dhcp)#default-router 192.22.4.253 192.22.4.254

1 2 ... 354 355 356 357 358 359 360 361 362 363 364 ... 940 941

Comentários a estes Manuais

Sem comentários

HP 7000 dl Router Series Guia do Utilizador Página 359

Comentários a estes Manuais

Manuais e produtos relacionados com Redes HP 7000 dl Router Series