HP 7000 dl Router Series Guia do Utilizador descarregar pdf (Página 503)

100

101

SROS Command Line Interface Reference Guide Serial Interface Configuration Command Set

snmp trap link-status

Use the snmp trap link-status command to control the SNMP variable to enable (or disable) the interface

to send SNMP traps when there is an interface status change (ifLinkUpDownTrapEnable per RFC 2863).

Use the no form of this command to disable this trap.

Syntax Description

No subcommands.

Default Values

By default, the ifLinkUpDownTrapEnable OID is enabled for all interfaces except virtual Frame Relay

interfaces.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), VLAN, T1 (t1 1/1), E1 (e1 1/1), DSX-1

(t1 1/2), G.703, serial (ser 1/1), DDS (dds 1/1), virtual Frame Relay (fr 1), virtual

PPP (ppp 1), SHDSL (shdsl 1/1), and loopback interfaces.

Functional Notes

The snmp trap link-status command is used to control the RFC 2863 ifLinkUpDownTrapEnable OID (OID

number 1.3.6.1.2.1.31.1.1.1.14.0).

Usage Examples

The following example disables the link-status trap on the serial interface:

(config)#interface serial 1/1

(config-ser 1/1)#no snmp trap link-status

1 2 ... 498 499 500 501 502 503 504 505 506 507 508 ... 940 941

Comentários a estes Manuais

Sem comentários

HP 7000 dl Router Series Guia do Utilizador Página 503

Comentários a estes Manuais

Manuais e produtos relacionados com Redes HP 7000 dl Router Series