HP 7000 dl Router Series Guia do Utilizador descarregar pdf (Página 696)

SROS Command Line Interface Reference Guide ATM Sub-Interface Config Command Set

spanning-tree bpduguard [enable | disable]

Use the spanning-tree bpduguard command to block BPDUs from being received on this interface. To

return to the default value, use the no form of this command.

Syntax Description

enable Enable the BPDU block.

disable Disable the BPDU block.

Default Values

By default, this command is set to disable.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: ATM sub-interface, Ethernet, virtual PPP interfaces, and

virtual Frame Relay sub-interfaces

Usage Examples

The following example enables the bpduguard on the interface:

(config)#interface atm 1.1

(config-atm 1.1)#spanning-tree bpduguard enable

Sem comentários

HP 7000 dl Router Series Guia do Utilizador Página 696