HP 7000 dl Router Series Guia do Utilizador descarregar pdf (Página 708)

100

101

SROS Command Line Interface Reference Guide BGP Configuration Command Set

/jointfilesconvert/63229/bgp router-id <ip address>

Use the /jointfilesconvert/63229/bgp router-id command to specify the IP address that the router should use as its BGP router ID.

Use the no form of this command to return to the default setting.

Syntax Description

<ip address> Designates the IP address this router should use as its BGP router ID.

Default Values

By default, no router ID is configured. The default action is detailed in Functional Notes, below.

Command Modes

(config-/jointfilesconvert/63229/bgp)# BGP Configuration Mode

Functional Notes

This command allows an IP address to be specified for use as the BGP router ID. If no IP address is

configured at BGP startup, it uses the highest IP address configured on a loopback interface. If no

loopback interfaces are configured, it uses the highest IP address configured on any interface that is

active. If the specified router ID is changed, existing sessions with BGP neighbors are reset.

Usage Examples

The following example configures IP address 10.0.0.1 as the BGP router ID:

(config-/jointfilesconvert/63229/bgp)#/jointfilesconvert/63229/bgp router-id 10.0.0.1

1 2 ... 703 704 705 706 707 708 709 710 711 712 713 ... 940 941

Comentários a estes Manuais

Sem comentários

HP 7000 dl Router Series Guia do Utilizador Página 708

Comentários a estes Manuais

Manuais e produtos relacionados com Redes HP 7000 dl Router Series