HP B-series Embedded Switches Manual do Utilizador Página 119
- Página / 270
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Working With the Core Switch 2/64
119Fabric OS Procedures Version 3.1.x/4.1.x User Guide
For complete information about switch FRUs, refer to the Core Switch 2/64
installation guide (the installation guide is also available on the v3.1.x or v4.1.x
Software CD).
Displaying Information on Switch FRUs
To view switch FRU information for a switch:
1. Log into the switch as the admin user.
2. Enter the chassisshow command at the command line. This command
displays the field replaceable unit (FRU) header content for each object in the
chassis. This command returns information for each FRU including:
■ DISABLED
The blade is powered on but disabled.
■ FAULTY
The blade is faulty because an error was detected.
■ UNKNOWN
The blade is inserted but it’s state cannot be
determined.
switch:admin> slotshow
Slot Blade Type ID Status
---------------------------------
1 SW BLADE 2 ENABLED
2 UNKNOWN VACANT
3 SW BLADE 2 ENABLED
4 UNKNOWN VACANT
5 CP BLADE 1 ENABLED
6 CP BLADE 1 ENABLED
7 UNKNOWN VACANT
8 SW BLADE 2 ENABLED
9 SW BLADE 2 ENABLED
10 SW BLADE 2 ENABLED
switch:admin>
- 3.1.x/4.1.x 1
- Third Edition (June 2003) 2
- Part Number: AA–RS23C–TE 2
- Contents 10
- Initial Configuration 13
- Power on the Switch 14
- Configuring the IP Addresses 14
- Initial Setup Example 19
- Switch Login 21
- Customize the Switch Name 24
- Manage Licensed Features 25
- Activating a License 26
- Verifying License Activation 26
- Configure Fabric Parameters 28
- Configure Software Features 30
- Verify Switch Function 31
- Connect ISLs to Switch 33
- Connect Devices to the Switch 35
- Basic Switch Management 39
- Enabling a Switch 40
- Disabling a Switch 40
- Disabling a Port 41
- Example: Core Switch 2/64 42
- Enabling a Port 43
- Switch 2/32 44
- Example: SAN Switch 2/32 44
- Domain IDs 47
- Setting a Domain ID 48
- Firmware Versions 49
- Switch Date and Time 51
- Fabric Configuration Settings 53
- Switch Names 57
- Switch Status Policies 58
- Tracking Switch Changes 63
- Using Dynamic Load-Sharing 66
- Help Commands 71
- Additional Help Topics 72
- Hexadecimal Port Diagrams 73
- 5 = 0101 D = 1101 74
- 6 = 0110 E = 1110 74
- 7 = 0111 F = 1111 74
- Firmware Download 75
- About Firmware Downloads 76
- The Firmware Upgrade Process 78
- 4.0.0c or less 84
- New Features 93
- Listeners 95
- Passwords 97
- Devices: 98
- Switch Access: 98
- Managing Passwords 99
- Setting Recovery Passwords 100
- Basic Security in FOS 101
- Frequently Asked Questions 106
- Working With the Core 109
- Switch 2/64 109
- Ports on the Core Switch 2/64 110
- About the Slot/Port Method 111
- Basic Blade Management 115
- Enabling a Blade 116
- Powering On a Blade 116
- Powering Off a Blade 116
- Core Switch 2/64 Chassis 118
- ■ DISABLED 119
- ■ FAULTY 119
- ■ UNKNOWN 119
- Blade Beacon Mode 123
- The SAN Management 125
- Application 125
- The Management Server 126
- Example: 128
- To delete a WWN from the ACL: 130
- *MS feature is disabled 138
- PID Addressing 139
- Overview 140
- Example Scenarios 142
- About Core PID Addressing 143
- Recommendations 145
- About PID Mapping 146
- Evaluate the Fabric 148
- Analyzing Data 149
- Performing Empirical Testing 150
- Planning the Update Procedure 151
- Hybrid Update 153
- Basic Update Procedures 154
- AIX Procedure 158
- Diagnostics and Status 161
- Diagnostics Overview 162
- Persistent Error Log 165
- Clearing the Switch Error Log 167
- Syslog Daemon 171
- Message Classification 172
- Syslogd CLI Commands 173
- Configuring syslogd 173
- Switch Diagnostics 176
- Port Diagnostics 181
- Hardware Diagnostics 187
- ■ camtest 189
- ■ centralMemoryTest 189
- ■ cmemRetentionTest 189
- ■ cmiTest 189
- Linux Root Capabilities 191
- Troubleshooting 193
- About Troubleshooting 194
- Fibre Channel Process 195
- Most Common Problem Areas 196
- Specific Scenarios 199
- Fabric Segmentation 203
- About Fabric Parameters 203
- Domain ID Conflicts 204
- Restore a Segmented Fabric 204
- Zoning Setup Issues 206
- Prevention 207
- Verify Fabric Merge Problem 208
- Edit Zone Config Members 208
- MQ-WRITE Error 209
- I2C bus Errors 210
- Device Login Issues 212
- Watchdog (Best Practices) 216
- Component Tests Overview 218
- Check Switch Components 219
- BadOrdSet, DiscC3 224
- Additional Component Tests 228
- Link Failure 229
- Port’s Physical State 230
- Speed Negotiation Failure 230
- Marginal Links 234
- Isolating the Areas 235
- Ruling Out Cabling Issues 236
- Glossary 237
Manuais e produtos relacionados com Comutadores de rede HP B-series Embedded Switches
Comutadores de rede HP J3245A Manual do Utilizador
(213 páginas)
(213 páginas)
Comutadores de rede HP 1700-24 Manual do Utilizador
(56 páginas)
(56 páginas)
Comutadores de rede HP 2520G-POE Manual do Utilizador
(101 páginas)
(101 páginas)
Comutadores de rede HP GbE2c Manual do Utilizador
(175 páginas)
(175 páginas)
Comutadores de rede HP HyperFabric Manual de Instalação
(156 páginas)
(156 páginas)
Comutadores de rede HP High Performance Clusters LC 1000 Series 359449-001 Manual do Utilizador
(33 páginas)
(33 páginas)
Comutadores de rede HP B-Series Manual do Utilizador
(13 páginas)
(13 páginas)
Comutadores de rede HP J3178A Manual do Utilizador
(112 páginas)
(112 páginas)
Comutadores de rede HP 212M Manual do Utilizador
(166 páginas)
(166 páginas)
Comutadores de rede HP 8212zl Manual do Utilizador
(138 páginas)
(138 páginas)
Comutadores de rede HP 10BASE-T Guia do Utilizador
(44 páginas)
(44 páginas)
Comutadores de rede HP Compaq Netelligent 5114 Desktop Ethernet Switch Guia do Utilizador
(22 páginas)
(22 páginas)
Comutadores de rede HP SN6000 Manual do Utilizador
(90 páginas)
(90 páginas)
Comutadores de rede HP 2524 Manual do Utilizador
(66 páginas)
(66 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.040 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais