HP B-series Embedded Switches Manual do Utilizador descarregar pdf (Página 157)

Updating Switches to the Core PID Addressing

157Fabric OS Procedures Version 3.1.x/4.1.x User Guide

14. Import the volume groups using vgimport. The proper usage would be

vgimport –m <mapfile> <path_to_volume_group>

<physical_volume_path>.

For example:

vgimport –m /tmp/jbod_map /dev/jbod /dev/dsk/c64t8d0

/dev/dsk/c64t9d0

15. Activate the volume groups using vgchange. The proper usage would be

vgchange –a y <path_to_volume_group>.

For example:

vgexport –a y /dev/jbod

16. If you are not using multi-pathing software, mount all devices again and

restart I/O. For example:

mount /mnt/jbod

17. If you are using multi-pathing software, re-enable the affected path. The

preceding steps do not “clean up” the results from ioscan. When viewing the

output of ioscan (see the following example), notice that the original entry is

still there, but now has a status of NO_HW.

Example

18. To remove the original (outdated) entry, the command rmsf (remove special

file) will be needed. The proper usage for this command would be rmsf –a

–v <path_to_device>. For example:

rmsf –a –v /dev/dsk/c65t8d0

# ioscan -funC disk

Class I H/W Path Driver S/W State H/W Type Description

-------------------------------------------------------------------------------

disk 0 0/0/1/1.2.0 adisk CLAIMED DEVICE SEAGATEST39204LC

/dev/dsk/clt2d0 /dev/rdsk/c1t2d0

disk 1 0/0/2/1.2.0 adisk CLAIMED DEVICE HP DVD-ROM 304

/dev/dsk/c3t2d0 /dev/rdsk/c3t2d0

disk 319 0/4/0/0.1.2.255.14.8.0 adisk CLAIMED DEVICE SEAGATEST336605FC

/dev/dsk/c64t8d0 /dev/rdsk/c64t8d0

disk 320 0/4/0/0.1.18.255.14.8.0adisk NO_HW DEVICE SEAGATEST336605FC

/dev/dsk/c65t8d0 /dev/rdsk/c65t8d0

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 269 270

Sem comentários

HP B-series Embedded Switches Manual do Utilizador Página 157